Rainwater Collection Systems
RAIN HARVESTING or RAIN CAPTURE is becoming increasingly popular for landscape irrigation due in part to recent improvements in drip irrigation technology and the increasing cost of treated potable water. Darco manufactures underground fiberglass rainwater storage tanks suitable for this purpose. One inch of rain on a 2000 square foot roof generates over 1000 gallons of free water. Arid western states such as New Mexico and Arizona support and promote Rain Harvesting and Drip Irrigation which returns moisture to the soil at slow absorbable rates with minimal evaporative loss.
Roof water generally carries leaves, dust, bugs, bird excrement, and a variety of other undesirable elements into any rain capture storage system. Screening or coarse filtering the water before it fills the storage tank is desirable provided the filter has the capacity to process the rain as fast as it falls, which may be difficult to do in the case of a “cloud burst”.
Always design your storage system with a high-volume bypass to safely divert excess rainwater that cannot be stored fast enough during a downpour. Also consider a tank overflow to release any excess water when the storage system is completely full. Both the Bypass and Overflow must be directed away from the tank and discharged where it will not cause erosion or building damage.
We do not recommend that you drink or bathe in rainwater unless it has been treated to your local Health Department standards. Rainwater should rightfully be used in a way that returns the moisture to the earth near the location where it fell, such as through outside landscape irrigation or a septic system leach field.